RFID TERMINAL Q2-EN001WB
INTERACTIVE RFID MULTIMEDIA TERMINAL
Q2-EN001WB
ACCESS CONTROL TERMINAL WITH TOUCH SCREEN DISPLAY AND LINUX OPERATING SYSTEM.
Q2 contains the best of RFID technology: two tag readers/writers operating simultaneously, one on 125 kHz and one on 13.56 MHz (compatible with NFC technology). Both can be installed with one or two antennas. The device can also be used simultaneously as a QR Code and Bar Code reader. It also features an I/O interface, 4 separately controllable RGB LEDs for backlighting the enclosure. Square-shaped 4""TFT LCD display. The device can update itself autonomously and be remotely assisted, making it particularly suitable for operation in geographically dispersed installations connected via the internet.
| CODE | NETWORKING | DESCRIPTION |
| Q2-EN001WB | Ethernet, Wifi and Bluetooth | |
| Q2-EN001WB-KBC | Ethernet, Wifi and Bluetooth | QR and BAR CODE reader |
- Ultra-flat design that can be easily integrated into any architectural context
- Based on open Linux-Yocto operating system
- The basic colours of the backlight LEDs can be programmed at setup
- Capacitive touch screen display
- Compatibility with recessed box 503
- Support for vertical or horizontal installation (optional)
| Power supply | 9 ÷ 23 VDC | IEEE 802.3.af standard PoE (optional with KU-POEV3 accessory) | Buffer battery (optional with KU-BAT-7508 accessory) |
| Absorption | Imax = 340 mA |
| Supported tags | 125 kHz with KU-A135 accessory (EM4x02 read-only, T55x7 read/write) | 13.56 MHz with KU-A125 accessory (MIFARE Classic EV1 1K/4K read/write, Ultralight, Desfire, ISO 14443B and ISO/IEC 15693-3 - UID only) |
| Input/Output | 1 opto-isolated Digital Input, 1 Output (NC relay NO C) |
| CPU | Freescale™ i.MX6 Family, based on ARM Cortex-A9 processors: i.MX6ULL up to 528 MHz clock |
| RAM | 256MB DDR3L soldered on board |
| Display | TFT LCD panel 4" 720x720 pixel active area 72 x 72 mm) | Led backlight and integrated capacitive touchscreen |
| Flash | 8GB eMMC soldered on board |
| S.O. | Linux File System Kernel version 4.9.88 Linux File System – YOCTO – Kernel version 4.9.88 |
| Networking | 10/100 Ethernet interface | Wi-Fi 802.11 a/b/g/n | Bluetooth 4.0 | BLE (optional with 7609-BLE accessory) |
| Interface | Serial TTL + power supply for external device connection | 2 USB 2.0 | 232 Debug TTL |
| Notifications | 4 side backlight RGB LEDs, driven separately. LED on RFID antenna/s |
| Clock | Internal RTC with dedicated backup battery |
| Audio | No |
| Dimensions | 149 x 129 x 30 mm (with mounting bracket 149 x 120 x 94 mm) |
| Weight | 225 g |
| Material | ABS |
| Colour | Black |
| Operating temperature | 0°C /+50°C |
KU-A135
Antenna for reading 13.56 MHz (HF) RFID tags to be installed inside the terminals (KUGHI, Q2 and Tornello TR-TSW1x).
Can coexist with the KU-A125 version.
KU-A125
Antenna for reading 125 MHz (LF) RFID tags to be installed inside the terminals (KUGHI, Q2 and Tornello TR-TSW1x).
Can coexist with the KU-A135 version.
KU-POEV3
Card that enables the device to be powered via Ethernet cable using a switch equipped with PoE (Power over Ethernet) technology, complies with the IEEE 802.3.af standard.
KU-BAT-7508
Battery management card for operation in the event of power failure (with battery included).
7722-00-AS
Conversion card from RS232 TTL to RS485.
7705
Card for connection between devices with Magnetic Stripe RS232 TTL and RS232 interface.
7609-BLE
Plug-in module for BLE interface. For installation on KUGHI and Q2, card 7705 is required.
KU-SUA
ABS support for KUGHI and Q2 terminals for table or wall installation. In the latter case, it can be installed on a recessed box 503.