INPUT/OUTPUT MODULES 7614
Module 2 Relay 2In+2Out RS485.
7614
MODULES THAT ENABLE THE CORRECT MANAGEMENT OF INPUTS AND OUTPUTS.
Equipped with LEDs on the card to simplify operational diagnostics and for the purpose of indicating: the power supply, the passage of data on the TX and RX lines and, finally, the status of the outputs (each output is associated with an LED). The activation and deactivation of each relay can be programmed at setup, using the buttons on the top of the terminal. The DIN rail housing speeds up installation and maintenance.
| CODE | RELAY PROTECTION |
| 7614-L | 24 Vdc |
| 7614-H | 230 Vac |
| Power supply | 12 VDC +/- 20% |
| Absorption | Imax = 50 mA |
| Microprocessor | 32 bit RISC CPU with 128kB ROM, 128kB RAM |
| Output | 2 relays 12A 250VAC-contacts C-NC-NO |
| Input | 2 digital input TTL (0-5V) (alternatively, at setup, DO and D1 Wiegand or Clock and Data MagStripe) | 2 buttons |
| Interface | RS485 |
| Notifications | LED |
| Dimensions | 2M-DIN - 90 x 36 x 60 mm |
| Weight | 60 g |
| Material | UL94V0 |
| Colour | Light grey |
| Operating temperature | 0°C /+70°C |