RFID VALIDATOR READER EXP.V
KEYBOARD EMULATION RFID VALIDATOR READER
EXP.V
VALIDATOR TERMINAL AVAILABLE IN TWO VERSIONS WITH FREQUENCIES 125 KHZ OR 13.56 MHZ.
The RFID validator, connected via USB to a PC, looks like a normal keyboard and enables the contents of the tag read to be copied to the cursor position. Can be configured at setup to convert the code into the most widely used formats (e.g. OCA encoding, 20-character decimal encoding, 13-character decimal encoding, etc.). In the 13.56 MHz version, it can be set to automatically read the contents of a MIFARE tag block with a specific password. The status of the terminal is highlighted by the LEDs changing colour. Designed for specific use at counters or desks. Supplied with 1.8m USB cable.
| CODE | FREQUENCY | COLOUR |
| EXP.VLF | 125 kHz | Black box |
| EXP.VHF | 13.56 MHz | Black box |
- Clean lines and Italian design
- Works without the need to install drivers or software
- Customisable front panel
| Power supply | 5 VDC |
| Absorption | Imax = 120mA |
| Supported tags | 125 kHz (LF) | 13.56 MHz MIFARE (HF) |
| Reading distance with ISO-CARD format proximity tag | 4 cm |
| Interface | USB |
| Notifications | Led RGB |
| Buzzer | No |
| Dimensions | 125 x 70 x 25 mm |
| Weight | 150 g |
| Material | ABS |
| Operating temperature | 0°C /+50°C |
AM-COFKEXP-PN
Outdoor hood for Experience readers.