RFID READER EXP.E

DUAL RFID TECHNOLOGY ETHERNET READER

RFID Readers | EXP.E
EXP.E | RFID Readers | APROMIX RFID S.r.l.

Frequency: LF 125 kHz / HF 13.56 MHz

Interface: Ethernet

Interface: BLE

EXP.E

RFID TERMINAL WORKING SIMULTANEOUSLY WITH 125 KHZ AND 13.56 MHZ FREQUENCIES.

125 kHz
enables reading of type Em4x02 tags and reading and writing of type T5557/5567/5577 tags.

13.56 MHz
enables reading the UID of Mifare Ultralight, ISO14443B and ISO15693 type tags; the reading and writing of 1k and 4k classic Mifare type tags, including electronic purse functions.

Enables the automatic UID reading plus a block with password for both Mifare and T55x7 tags. The security level is increased by the fact that passwords (up to 8) are stored in the terminal and are therefore not included in communications to and from the master. The terminal is equipped with RGB LED lighting, the basic colours of which can be programmed at setup for better integration into the installation environment. These LEDs, in combination with a multi-frequency buzzer, enable the status of the terminal and the outcome of the badge readings (access allowed, denied, etc...) to be clearly indicated. Also available in a dual RFID technology Ethernet version with QR reader and BAR code. Supplied with 2.5m Ethernet cable.

CODE COLOUR DESCRIPTION
EXP.E Black box  
EXP.ET Black box Tropicalised*
EXP.E-QR Black box QR Code and barcode reader
EXP.ET-QR Black box QR Code and barcode reader and Tropicalised*
EXP.EW Black box  

* recommended pairing with code AM-COFKEX-PN

  • Clean lines and Italian design
  • Automatic reading of block with password
  • LED-based colours programmable at set up
  • Is able to distinguish between two different modes of badge presentation (slow and fast)
  • Compatibility with recessed box 503
  • Customisable front panel
Power supply 12 VDC (optional 5 VDC) | PoE (with switch cod. 7820 or with EX-POE accessory)
Absorption Imax = 350 mA
Supported tags 125 kHz (LF) | 13.56 MHz MIFARE (HF)
Reading distance with ISO-CARD format proximity tag 4 cm
Output 1 relay C-NC-NO
Interface Ethernet | BLE (optional with 7609-BLE accessory)
Notifications Led RGB
Buzzer Yes (driven in frequency)
Dimensions 125 x 70 x 25 mm
Weight 150 g
Material ABS
Operating temperature 0°C /+50°C

EX-POE

Accessory that enables dual technology Experience models (EXP.E) to be powered via Ethernet cable, using a switch equipped with PoE (Power over Ethernet) technology, meets the IEEE 802.3.af standard.

7609-BLE

Plug-in module for BLE interface. For installation on KUGHI and Q2, card 7705 is required.

AM-COFKEXP-PN

Outdoor hood for Experience readers.