TRIPOD TURNSTILE TR-TSW1

TRIPOD TURNSTILE WITH INTEGRATED RFID READERS

Pedestrian access | TR-TSW1
TR-TSW1 | Pedestrian access | APROMIX RFID S.r.l.

Frequency: LF 125 kHz / HF 13.56 MHz

Interface: Ethernet

TR-TSW1

AUTOMATIC PEDESTRIAN ACCESS POINT MANAGEMENT SYSTEM WITH ACCESS CONTROL FUNCTION.

In addition to classic I/O contacts the turnstile is equipped with an Ethernet interface and can handle one or two RFID readers, both HF and LF, that are perfectly integrated into the structure and management electronics. Thanks to the Ethernet interface, read events can be sent to a remote server either via socket or via HTTP. Likewise, the turnstile can receive opening and unlocking commands. Can be equipped with a remote control console and be configured dynamically. Notifications to the user are sent via two groups of RGB LEDs and an internal buzzer. The colouring of the LEDs during the stand-by phase is dynamic and can be configured at setup to optimally adapt the turnstile to the surrounding environment. The turnstile is powered at 12 VDC and, in the event of a lack of power, automatically unlocks the access point. An additional safety-related function is a remotable input which, if the relevant contact is opened, immediately unlocks the turnstile in both directions.

CODE COLOUR
TR-TSW1G-V2 sand grey RAL 7032
TR-TSW1N-V2 black RAL 9005

 

  • Original and innovative design
  • Ease of installation thanks to the single Ethernet point required
  • LED-based colours programmable at set up
Power supply 12 VDC +/- 10%
Absorption Imax = 2200 mA (12 VDC-5A power supply is recommended)
Microprocessor 32 bit RISC CPU with 128kB ROM, 128kB RAM
Output 4 relays 12A 250 vac | contacts C-NC-NO (optional)
Input 4 Digital input TTL 5V | 3 Integrated buttons
Interface Ethernet | Digital input
Notifications 12 RGB LEDs (6 per side)
Buzzer Yes (driven in frequency)
Dimensions 1050 x 470 x 875 mm
Weight 36 kg
Material Hot-dip galvanised steel and ABS dome
Colour Light grey or black
Operating temperature 0°C /+50°C

KU-A135

Antenna for reading 13.56 MHz (HF) RFID tags to be installed inside the terminals (KUGHI, Q2 and Tornello TR-TSW1x).

Can coexist with the KU-A125 version.

KU-A125

Antenna for reading 125 MHz (LF) RFID tags to be installed inside the terminals (KUGHI, Q2 and Tornello TR-TSW1x).

Can coexist with the KU-A135 version.

7705

Card for connection between devices with Magnetic Stripe RS232 TTL and RS232 interface.